Overview
If you own a car you will know that ho important to know that how to jump start a car. We need to jump-start a car when we have faced a flat battery issue. A flat battery is a very common issue but it’s very annoying when you are in the middle of the road. A jump starter is a very important car accessory that you always need to keep in your car. Car batteries are not made for long last, after 3 to 4 years you need to replace your car battery. Sometimes due to our careless attention about car cause of dead battery or reduce the life of car battery. Jumping a car is not a difficult process, you just need to know the right use of jump starter. You should know how to connect the jump starter correctly with your car battery because if you put it in wrong it will be damage your battery permanently. Usually, we had to face this issue in cold weather.
Also Checkout: How To Take Care Of Car In Summer
Dead Battery Causes
A car battery can run out of charge due to some common mistakes. However, car batteries are not made for long last. You can spend a long last good time with your car battery if you do follow the precautions and take good care of your car.
- A poor and old battery dead soon.
- When you turn on headlights and radio without turning on the engine.
- Loose connection of wires causes to drain your car battery.
- Extreme hot and cold weather cause of flat battery and never perform to start your car engine.
- Fault in your car battery charging system is a big cause of flat battery. It may be stopping your car while you’re driving.
Also Checkout: How To Start a Car That Has Been Sitting for 2 Years
How To Use Jump Lead Safely
Jumpstarters use to transfer the electricity from one to another car to charge the battery. Using a jump starter may look pretty and simple, but it’s not easy just like it seems. Before using a jump lead you need to know the right use of jump starter because if you connect the jump cable wrongly you will be damage your car battery and also it can cause of short circuit. A small mistake of wrong connection can be the cause of big consequences. However, if you don’t have proper knowledge, you should leave this work for an expert mechanic. Keep following the below information step by step to connect jumpstarter carefully.
Also Checkout: How To Start A Car With Bad Starter
Step 1
To transfer the electricity from charged battery car to a flat battery is quite easy and simple. Close flat battery car to another car, so that battery is close and can be connected to jump starter easily.
Step 2
Turn of the ignition of both cars. To make sure you can connect the wires of the jump starter safely.
Step 3
Connect the one red clip (+) to the positive terminal of your dead battery. It’s recognized by the POS or + sign and it’s also bigger than the negative terminal. Connect the other red clip to a charged battery positive terminal.
Step 4
Connect the one black clip to the negative terminal of charged car battery and the other black clip to the earthing point of the dead car battery. Do not touch the two ends of the cable together while doing this process.
Step 5
Start the ignition of a good battery car to send electricity to the flat battery car. The connection of the jump starter can help you to charge your car battery immediately. This process needs maximum your 15 minutes and the flat battery car successfully charge to run away.
Conclusion
Charging a car by jump starter is a simple and fast way to charge your car but it’s not safe for your car battery if you use it regularly. To ensure your car battery health you need to charge your car battery while driving. If you had face a flat battery issue regularly it’s a sign your battery needs replacement. If you feel it’s struggling to start a car with your old battery and you have not replaced it in the last 5 years, the first thing you need to do is replace a car battery.